近年来，随着经济的发展和科技进步，自动化已成为现代行业发展的重大趋势，特别是为占据工厂大会链接的一个重要地位的紧缩链接。达到需求装配步进电机，自动化，智能，推动自动，智能，标准化的运行，拧紧可追溯性要求的数据也越来越高，所以紧密技术的自动化得到了大力发展，而且拧紧工具的催化自动控制升高。作为行业中的领先人物，快速智能收紧对时代的变化非常敏感，它具有自己的科学研究实力作为武器的发展。超过十年的深入工作紧缩行业，迅速一直不断探索和学习，并建设性地提出了行业中“数字收紧”和“智能收紧”的概念，这不仅打破了外国品牌的长期垄断，而且还可以实现更多智能和自动拧紧工具。面对时代的多元化要求，快速智能收紧遵守“收紧是所有科研技术的核心”的经营理念，为客户提供智能收紧产品和服务。它为领先技术的独特优势，卓越的性能，高成本的性能，数据可追溯性和自动化，无刷电动螺丝刀已经全球销售了100多万台，并出口到全球200多个国家和地区，为成千上万的用户提供最适应的数字紧固装配服务。行业领先的精密紧固导致拧紧工具的精确开发。徐龙无刷智能电动螺丝刀，其扭矩精度为数百万拧紧组件精确控制在标准偏差≤3％内。在性能参数，扭矩，转速，等待的范围内.With。根据不同的紧固工艺要求，可以自由地设定和调整时间和旋转方向，以实现精确的紧固。 The advanced data tracing function leads the digital development of tightening tools rapidly.Through the built-in current and Angle sensors, the brushless servo electric screwdriver can be precisely controlled during each tightening process, and all important parameters during the tightening process can be recorded in real time.The data acquisition system on the computer side makes the whole tightening process more intuitive, and also stores the tightening data and carries out statistics on the qualification rate of work, so as to improve the traceability of data. The leading advantage of reducing cost and increasing efficiency leads the rapid development of tightening tools with high efficiency.The intelligent tightening system optimizes the tightening process, improves the production efficiency, reduces the rework caused by common tightening faults such as floating lock, sliding teeth and oblique punching, and reduces unnecessary production costs.Intelligent tightening system has a variety of tightening error warning, with efficient tightening program, in order to improve productivity at the same time greatly improve the product yield. In the future, We will continue to make efforts, study and innovate tightening technologies, master core technologies, optimize tightening tools, and create maximum benefits and higher market value for our customers with complete and one-stop quality services.

电动螺丝刀适用于机械组装，建筑和其他行业的螺钉连接公司或拆卸。单相系列励磁螺丝刀由单相系列励磁电机，齿轮减速器，离合器装置，螺丝刀头和保护盖，前进和反向电源开关和电源连接装置组成。电动螺丝刀离合器装置由钳口离合器，压力弹簧，调节螺母和具有螺丝刀钻头的主轴组成。螺丝刀钻头的旋转运动通过次级齿轮通过电动机减速，然后驱动空心轴以旋转。空心轴的前端是钳口离合器的有源部分。启动电机后，空心轴旋转而不负载，螺丝刀钻头静止。当螺丝刀钻头被轴向压缩时，空心轴弹簧压缩，使得离合器从动件的端面上的齿与离合器驾驶员的齿接合在空心轴的前端，使得钢球钳口离合器与螺丝刀钻头一体化。螺丝刀钻头也旋转在一起，可以拧紧或拆下螺钉。在钳条离合器接合之后，扭矩由三个钢球在中间传输。 When working, if the required torque is reached or the torque is too large, the jaw clutch follower compresses the spring, and slips away from the driver and follower of the jaw clutch to prevent thread damage and motor overload. The adjusting nut is used to adjust the output torque of the screwdriver bit. Through the working spring, the pressing force of the follower of the jaw clutch is adjusted to ensure the smooth separation of the jaw clutch under a certain torque. The torque can be achieved by turning the adjusting nut. If the adjusting nut rotates in the direction of the jaw clutch, the spring is compressed and the transmission torque is large; if the adjusting nut rotates in the opposite direction of the jaw clutch, the spring force is small and the transmission torque is also small. The screw tightening torque can be adjusted according to the above method, so that there is a stable clamping force between the screw and the workpiece, so as to ensure the assembly quality of the screw and the workpiece.

在生活中，我们经常使用螺丝刀等工具来拆卸东西。通常我们自己手动拧螺丝，我们总是把它们直接拧进孔里，但事实上这是错误的。虽然我们可以把它拧紧得非常紧，但这种方法会对一些精密仪器造成损坏。随着科学技术的进步，市场上也出现了许多定位于精密仪器维修的电动螺丝刀。齿轮调整功能，可根据需要调整扭矩，满足精密仪器的维修需要，而不损坏螺丝。但这些电动螺丝刀的缺点是不能很好地拧紧。为了解决这一问题，快速电动螺丝刀变速箱方案是基于自主研发设计的多层变行星变速箱传动比机构。该产品有两级、三级、四级变速，可根据电动螺丝刀的设计要求更换。改变减速比，调整变速箱的输入速度和扭矩。结构紧凑，效率高，实现拧紧功能。 About electric screwdriver Speaking of electric screwdrivers, I believe that many electrical enthusiasts and digital enthusiasts are very familiar with it. Compared with the pen, the size of the electric screwdriver is much smaller than the traditional cordless electric screwdriver. Whether corded or cordless, today's power tools have greater power (torque) in smaller, lighter (smaller size) models. Ergonomic considerations make today's electric screwdrivers easier to use and safer. what can we do? When you twist the screw, you can easily remove the screw by touching the switch, and you don't need to use a little bit of force. The screwdriver has a torsion protection function and evenly rotates to prevent component damage caused by excessive force. If you want to enjoy the fun of disassembling things, then it is a traditional screwdriver. It is suitable for regular household appliances such as quartz watches, cameras, radios, computers, mobile phones, drones, etc., to meet most of the daily repair needs. You can't see How to solve We have developed and designed an electric screwdriver 6mm planetary gearbox solution In response to the design and functional requirements of electric screwdrivers with small size and high torque, we have developed and designed an electric screwdriver 6mm planetary gearbox solution. Through the analysis of the functional requirements of the electric screwdriver, we use the positive and negative planetary gearbox to adjust and adjust the torque of the electric screwdriver for tightening and loosening screws. In terms of safety, safety self-locking can be realized by using the reduction gear box and the screw rod. It is detected that the screwdriver is twisted manually, and the internal self-locking structure will automatically open to avoid damage to the motor. We will devote our passion for life to each product, presenting a quality life with a rigorous and meticulous attitude. For those who often use electric screwdrivers, noise is their annoyance. In order to solve this problem, we carry out displacement coefficient distribution, mesh angle optimization calculation, slip rate and coincidence check for each gear and structure in the intelligent electric screwdriver motor to improve the efficiency, noise, life and other technologies of the optimized gearbox. problem. At the same time, finite element analysis is used to analyze and check the tooth surface strength of spiral teeth and bevel gears to improve the stability of the electric screwdriver gearbox.

电动螺丝刀的使用方法和维护注意事项是什么？1.电动螺丝刀必须按时保养。当电动螺丝刀的扭矩太小不能满足使用时，应立即停止使用，并更换为扭矩较大的电动螺丝刀；2.电动螺丝刀不转动时，头部容易脱落，螺丝刀速度不平稳，或螺丝刀不会自动停止，应及时送修，确保下次使用；3.拔出电动螺丝刀及配套电箱插头时，应以插头底座为受力点，不得用力拉拔电线；4.严禁敲击电动螺丝刀；5.电动螺丝刀在工作过程中震动较大，必须停止使用，以免进一步损坏电动螺丝刀；6.按开始按钮。当电动螺丝刀因扭矩太小而无法转动时，应注意此情况不应超过10秒，以免造成电动螺丝刀中的电机；7.注意使用电动螺丝刀。不同规格的螺钉应与不同扭矩范围的电动螺丝刀相对应。2.以下10点总结了使用电动螺丝刀的注意事项。1.严禁撞击电动螺丝刀（注意碰撞或坠落，否则会引起电机噪音和螺丝刀晃动）。2.拔出电动螺丝刀与配套控制器的连接插头时，应以插头底座为受力点，不得用力拉拔电线，以免损坏接触插头。3.电动螺丝刀在工作中震动较大时，必须停止使用，以免对电动螺丝刀造成更大的损坏，并通知管理人员安排维修。4.当电动螺丝刀出现异常问题时，应及时通知管理员并送维修人员进行维修。一般异常为：螺丝刀不转动，螺丝刀速度不平稳，螺丝刀头易脱落或有晃动，螺丝刀不会自动停止。5.当电动螺丝刀扭矩太小不能满足使用要求时，应停止使用，并及时通知管理层安排更换高扭矩电动螺丝刀。6.按下启动按钮时，由于扭矩太小，电动螺丝刀无法旋转，应注意此状态应控制在10秒内，以避免损坏电动螺丝刀电机。7.在插入电源之前，应将开关置于断开状态。注意电源电压是否适合机器。不使用电动螺丝刀或切断电源时，应打开插头。8.使用时，不要将扭矩调整设定得太大。9更换螺丝刀头时，务必将电源插头从电源插座上拔下，并关闭螺丝刀的电源。10在使用过程中，不要跌落或撞击电动螺丝刀。

电动螺丝刀就是我们通常所说的电动螺丝刀。它是一种常用的工具，与螺钉一起用于拧紧或松开螺钉，但电动螺丝刀与普通螺丝刀完全不同。它以电为动力。因此，在使用过程中有很多注意事项需要注意。使用电动螺丝刀时需要注意什么？电动螺丝刀的用途是什么？这里是一个简单的介绍。1.工具/原材料快动电子电动螺丝刀2。方法步骤1。连接或拆卸螺丝刀头时，用指尖向上推螺丝刀盖。2.插入电源并将开关置于“F”位置，安装螺丝刀头，调整提前拧紧螺钉所需的扭矩段位置。3.手动按下开关，按板启动，将扣机拉到自己的方向，然后开关“ON”启动电机，开始操作锁紧螺钉。当螺钉锁超过设定扭矩时，离合器将自动滑动，螺丝刀头停止旋转，工作完成。4.松开手动按压开关时，螺丝刀电源将关闭，电机将停止工作。重复操作可以继续使用。如果要松开螺钉，应将开关置于“R”位置，按下上述操作即可完成。5.调节扭矩由底部的扭矩调节环进行调节。机身本身的段数并不代表输出扭矩值，而是由扭矩计表示。6.螺丝刀头调整扭矩段数与其自身输出扭矩之间的关系。三、注意事项1。检查电压是否正常。2.根据要锁定的螺钉的形状，配备螺丝刀头。3.调整锁定产品4的扭矩。如果连续使用时间过长，电机加热时应停止运行，待电机完全冷却后方可使用。5.日常操作完成后，应进行清洁和维护，以延长使用寿命。6.关于什么牌子的电动螺丝刀好的问题，苏东电子有很大的发言权。它生产的系列电动螺丝刀真正做到了每一个细节都为用户所考虑。首先是要有一个强大的发动机。这让每个消费者都能找到一把适合自己需要的电动螺丝刀，无论是铝合金还是硬木，他们都可以轻松地钻孔；并设计了正反转开关和调速旋钮，可精确设定转速和扭矩，更适合各种场合；在刀具批量位置配备斯坦利特殊的防尘滚珠轴承和轴承支撑系统设计，大大延长了机床的使用寿命；符合人体工程学设计，单手操作简单方便。

1.操作方法1。连接或拆卸电动螺丝刀刀头时，要用指尖将螺丝刀帽向上推。2.插上电源，将开关调至“F”位置，安装螺丝刀头，提前调整所需扭矩的位置，拧紧螺钉。3.手动按下开关压版启动，将挤版机拉向自己的方向，然后开关打开“ON”启动电机运行，开始操作锁紧螺丝。当螺丝锁紧超过设定扭矩时，离合器自动打滑，螺丝刀头停止转动，工作完成。4.松开开关压板，螺丝刀电源关闭，电机停止工作。 Repeated operations can continue to use. If you want to loosen the screw, the switch should be placed in the "R" position, and you can complete it by pressing the above operation. 5. The adjustment torque is adjusted by the torque adjustment ring at the bottom. The number of segments of the body itself does not represent the output torque value, but is expressed by a torque meter. 6. The screwdriver head adjusts the relationship between the number of torque segments and its own output torque. 2. Preparation before use 1. Check whether the voltage is normal. 2. According to the shape of the screw to be locked, equip the screwdriver head. 3. Adjust the torque of the locked product Three, repair and maintenance 1. If the continuous use time is too long, the motor should be stopped when it heats up, and it can be used after it is completely cooled. 2. After the daily operation is completed, it should be cleaned and maintained to extend the service life.

人们经常问电动螺丝刀扭矩3NM是什么意思?电动螺丝刀扭矩3N。M表示螺丝刀对紧固螺钉施加的扭矩为3n.m，超过此扭矩后扭头会自动打滑。该工具一般用于精密螺钉固定。物理上的力矩是力矩的大小，等于力与力臂的乘积，国际单位为牛顿米N*m。在物理学中，力使物体绕旋转轴或支点旋转的趋势称为力矩。转矩也叫转矩。力矩可以使物体改变其旋转运动。推或拉涉及力，而扭转涉及力矩。力矩等于径向矢量和力的叉乘。 In short, a torque is a torsional force applied to objects such as bolts or flywheels. For example, tighten the bolt or nut with the opening of the wrench, and then turn the wrench. This action will generate torque to turn the bolt or nut. According to the International System of Units, the unit of torque is Newton meters. The connection quality of torque screwdriver fasteners directly affects the use quality of various instruments, electromechanical equipment, household appliances and other products to the reliability of these products. Therefore, torque tools such as torque screwdrivers are gradually being used more and more in industrial production. Functional principle of torque screwdriver: The preset torque screwdriver can set the torque value in advance. When the screwed fastener reaches the predetermined torque value, the clutch inside the screwdriver will automatically disengage and send out "click, click, click... ", and you can feel this movement with your hands. At this time, even if you continue the afterburner operation, it will not exceed the preset limit.